HEAT EXCHANGERS
PRODUCTS
 
In the refrigeration cycle, for higher efficiency, the liquid refrigerant condensed in the condenser and flowing in the capillary tube towards the evaporator should be cooled, while the vapour refrigerant sucked by the compressor from the evaporator through the suction tube should be heated up from saturated to superheated condition. Hence, the two tubes are brought together to achieve both of these objectives. This twin tube system is called the "heat exchanger" or "suction tube assembly" of the refrigeration cycle.

To help the heat exchange, the two tubes can be soldered together as in the tube-on-tube copper heat exchangers, or the capillary tube can be passed through the suction tube as in the Al-Cu mono-tube heat exchangers.

KONVEYOR manufactures large quantities of both types as well as special ones for freezers like combi, frost-free, or home air conditioner.

Copper, capillary, and (partially) aluminium tubes are cut to lengths and brought together by using special machines.

Aluminium-copper connections of the mono-tube suction tubes may be made by different methods like, Zn-Al alloy brazing, ultrasonic soldering, or eutectic welding.
 
  • All heat exchangers are tested against leak by special instruments or apparatus including Helium Snuffers.
  • All capillary tubes of every heat exchanger are tested by flow meters.
  • All heat exchangers meet the internal cleanliness criteria defined by the related standards.
  • All open ends are capped with plastic caps; they are packed on Euro pallets for long distance deliveries.


The Aluminium and Capillary tubes used in the heat
exchangers are manufactured by KQNVEYOR internally.